1'' 5 Lug Wheel Spacer 5x4.5 For 07-13 Ford Edge 64-70 Ford Falcon - 2PCS
Wheel spacers are designed to move the wheels further out from the hub, give your vehicle a more aggressive stance and allow for better handling characteristics. They also increase tire clearance, fix brake caliper clearance issues, and allow the installation of lift or lower kits and larger traction tires.
The spacers are available in a range of thicknesses and bolt pattern designs to fit virtually any vehicle. Lightweight aluminum construction ensures they will remain corrosion-free for a lifetime, and it ensures they will place a low amount of unsprung weight and stress on wheel hub components.
To get a better driving experience, you can handle high-performance wheel spacers that will keep you in control on-road and off-road over the bumps.
Features
- Manufactured from sturdy materials
- Constructed to ensure ultimate operation
- Developed to improve your driving experience
- Widen your vehicle wheelbase to increase stability and enhance resistance to side rollover.
Note:
1. Installation by a professional technician is highly recommended.
2. Avoid using an impact wrench; hand wrench is recommended. Improper usage may cause lug nuts/bolts to break or loosen while driving, which will take potentially accident or injury. Be sure to torque the lug nuts to manufacturer specifications.
3. Clean the surface where the wheel spacer will be mounted. Then, clean the back of the wheel as well. When applicable to your specific vehicle application, remove the rotor/drum retainer clips. Be sure to remove all rust and corrosion with a wire brush. All surfaces must be clean so the wheel spacer sits perfectly flat on the vehicle mounting surface. If the surface is not clean, wheel vibration will occur.
4. Re-torque all lug nuts after 50-100 miles of driving, then again after 2-3,700 miles. Tip: Ensuring that all mating surfaces are properly cleaned before re-torquing.
Product Specifics
- Type: Wheel spacer
- Items Included: 2pcs-5X4.5-wheel spacer
- Inside Diameter: 82.5mm
- Number of Pieces: 2pcs
- Placement on Vehicle: Front+Rear+Left+Right
- Centering: 82.5mm
- Features: Easy Installation
- OE/OEM Part Number: 5X4.5-1/2-2O-1"-silver-wheel spacer
- Hub Bore: 82.5mm
- Color: Silver
- Material: High-Quality t6 6061 Billet Aluminum
- Vintage Car Part: No
- Manufacturer Warranty: 1 year
- Finish: CNC Machined Polished Aluminum Finish
- Spacer Thickness: 1"
- Thread Size: 1/2-2O
- Bolt Pattern: 5Lugs—wheel spacer
- Universal Fitment: No
- Performance Part: Yes
- Superseded Part Number: 5X4.5-1/2-2O-1"-silver-82.5mm
- Stud Grade: 10.9
- Lug Patterns: 5Lugs
- Torqued Down By Hand At: 85 FT/LB
- Hubcentric: No
- Wheel bolt pattern: 5x4.5
- Vehicle bolt pattern: 5x4.5
- UPC: Does not apply
- Thickness: 1" (25 mm)
- Wheel Bore: 82.5 mm
- Thread Pitch: 1/2"x20 Studs & Lug Nuts
Installation
1. Check the tires and jack up the vehicle with a hydraulic lifter.
2. Remove the lug nuts and the tire and wheel.
3. Install the wheel spacers with the supplied lug nuts.
4. Reinstall the tires/wheels on the wheel spacers and tighten the lug nuts.
