Red New Mechanical Hydraulic Press Car Door Jack & Bumper Handler Stand
This product is a versatile door jack designed to assist technicians in handling large bumpers and doors on their own.
It features ample padding to prevent any metal-on-metal contact and minimize the risk of damage.
The unique design includes an 8" front-to-back tilting adjustment and side-to-side tilt adjustment, making part removal and installation easier.
The wide stance provides added stability during use.
Features
- Hydraulic system for easy raising and lowering
- Rubber-coated jack feet for secure placement
- Heavy gauge steel construction with a powder coat finish
- Easily to maintain
Note:
If you have any questions or problems, please contact us.
Product Specifics
- Drive: Hydraulic
- Condition: New
- Suitable for: Vehicle/Car
- Material: Steel
- Capacity: Door Jack
- Color: Red
- UPC: Does not apply
- Warranty: 1 Year
- Max. Lift Height: 365mm
- Min. Lift Height: 195mm
- Packing Size: 29.13" x 24.21" x 6.50"
- Weight: 50.95 lbs.
- Ship from: Ontario, California
- User Manual: Yes
- Maximum Load: 200kg
Includes
1 x Red New Jack & Bumper Handler Stand
Installation
1. Lower the glass window of the car door to the lowest position before using the RE80.
2. Release the valve of the bottle jack and adjust the support frame (#16) under the car door, maintaining a small gap.
3. Adjust the top bar (#1) to leave a small gap between the car door and the top bar.
4. Tighten the valve of the bottle jack and operate it to lift the support frame (#16) until it reaches the bottom of the car door.
5. Lower the top bar (#1) until it reaches the top of the car door, then tighten the adjustment knob (#5). Adjust the position of the fixed rods (#4) to ensure the car door is securely held between them and is vertical. Tighten the butterfly nuts.
6. Remove or install the car door by operating the bottle jack.